Shun Combination Whetstone 1000/6000
Hold the knife maker’s angle yourself: 1000 restores a dull edge and 6000 polishes; no coarse chip side. Maker source.
As an Amazon Associate I earn from qualifying purchases. Some links on this page are affiliate links — if you buy through them, we may earn a commission at no extra cost to you. Disclosure
"Best" here means the closest match to your knives: the knife maker's angle, the knife type and what the sharpener maker allows. Every figure comes from the makers; we don't lab-test sharpeners. How we choose.
"Japanese knife" covers a wide range of edges. Shun sharpens at 16° on each side. Miyabi gives 9.5–12° and Global 10–15°, without saying per side or total. A traditional yanagiba is single-bevel, flat on the back. The right sharpener is the one that can reach your maker's angle.
Hold the knife maker’s angle yourself: 1000 restores a dull edge and 6000 polishes; no coarse chip side. Maker source.
325/1200 diamond plate used dry; maker lists single or double bevels. The angle is held by hand. Maker source.
Its 15–30° adjustment can reach a published 16° edge, but not a 10° santoku edge. Maker source.
| Knife maker | Published angle | What fits |
|---|---|---|
| WÜSTHOF — Asian-style (santoku, nakiri) | 10° per side | whetstone or diamond plate held at the maker's angle (no fixed setting below 14° here) |
| ZWILLING — ZWILLING santoku | 9–12° as stated (Zwilling doesn't say whether this is per side or total) | ask the maker whether it's per side; a whetstone works at whatever angle that turns out to be |
| MIYABI — All MIYABI series | 9.5–12° as stated (Miyabi doesn't say whether this is per side or total) | ask the maker whether it's per side; a whetstone works at whatever angle that turns out to be |
| Shun — Shun double-bevel knives | 16° per side | 15° fixed settings, adjustable systems, stones |
| Global — Global knives | 10–15° as stated (Global doesn't say whether this is per side or total) | ask the maker whether it's per side; a whetstone works at whatever angle that turns out to be |
| MAC — MAC knives | 15° per side | 15° fixed settings, adjustable systems, stones |
| Made In — Santoku | 12.5° per side | stones and adjustable systems; 14–15° fixed settings come close |
| Model | Angles | Abrasive and grit | Stages | Serrated | Ceramic | Warranty |
|---|---|---|---|---|---|---|
| any, held by hand | water stone (1000 / 6000) | 2 | not published | not published | not published | |
| 15–30° per side, adjustable | tri-brasive rod: diamond + fine ceramic (320 / 600 / fine ceramic) | 3 | with an add-on serration rod (not in the box) | not published | 3 years | |
| 15° and 20° per side | 100% diamond (stages 1–2), stropping disks (stage 3) | 3 | yes (manual) | no | 1-year limited (manual) | |
| any, held by hand (guide marks 14°, 17°, 20°, 25°) | diamond (325 / 1200) | 2 | not published | not published | 3-year (Sharpal site) |
Premium · whetstone (water stone)
Good fit for: Japanese knives at their own angle; restoring a dull edge, then polishing.
| Variant / maker reference | SSM0600 |
|---|---|
| Type | whetstone (water stone) |
| Angles | any, held by hand |
| Abrasive and grit | water stone (1000 / 6000) |
| Stages | 2 |
| Serrated knives | not published |
| Ceramic knives | not published |
| Single-bevel knives | not published |
| Power | manual |
| Water or oil | water — soak before use |
| Warranty | not published |
Limits: no coarse side for chips; angle is held by hand; stone must be soaked first.
Shun factory edge is 16° per side (Shun FAQ); angle is held by hand.
Skip it if… you want a sharpener with a fixed angle; your knives are chipped.
Sources: manufacturer page · maker support page · Checked Nov 18, 2026
Check price on AmazonMid-range · guided (clamp + rod)
Good fit for: any angle from 15° to 30° in 1° steps; matching a maker's factory angle.
| Variant / maker reference | WSBCHPAJ |
|---|---|
| Type | guided (clamp + rod) |
| Angles | 15–30° per side, adjustable |
| Abrasive and grit | tri-brasive rod: diamond + fine ceramic (320 / 600 / fine ceramic) |
| Stages | 3 |
| Serrated knives | with an add-on serration rod (not in the box) |
| Ceramic knives | not published |
| Single-bevel knives | not published |
| Power | manual |
| Warranty | 3 years |
Limits: serrated needs an add-on rod; lowest setting is 15°.
Angle set from 15° to 30° in 1° steps (maker).
Skip it if… your knives are under 15° per side; you want a two-minute sharpener.
Sources: manufacturer page · Checked Nov 18, 2026
Check price on AmazonPremium · electric
Good fit for: a mixed block of 15° and 20° knives; serrated knives; single-bevel knives (maker procedure).
| Variant / maker reference | Model 1520 White, maker SKU 0115200 |
|---|---|
| Type | electric |
| Angles | 15° and 20° per side |
| Abrasive and grit | 100% diamond (stages 1–2), stropping disks (stage 3) |
| Stages | 3 |
| Serrated knives | yes (manual) |
| Ceramic knives | no |
| Single-bevel knives | yes — manual gives a single-bevel procedure |
| Power | corded, 120 V |
| Warranty | 1-year limited (manual) |
Limits: 1-year limited warranty; not for thick old cleavers (manual).
From the maker's instructions:
Stage 1 is 15° (Asian-style), stage 2 is 20° (European/American), stage 3 strops both (maker page).
Skip it if… you own ceramic knives; your knives are under 14° per side.
Sources: manufacturer page · manual · Checked Nov 18, 2026
Check price on Amazon (white finish)Budget · diamond plate
Good fit for: dry sharpening with no soaking; single- or double-bevel knives (maker); beginners who want an angle guide.
| Variant / maker reference | 156N, 6 × 2.5 in, 325/1200 |
|---|---|
| Type | diamond plate |
| Angles | any, held by hand (guide marks 14°, 17°, 20°, 25°) |
| Abrasive and grit | diamond (325 / 1200) |
| Stages | 2 |
| Serrated knives | not published |
| Ceramic knives | not published |
| Single-bevel knives | yes — maker: single or double bevel |
| Power | manual |
| Water or oil | none — sharpen dry |
| Warranty | 3-year (Sharpal site) |
Limits: finishes at 1200 grit; angle guide has four set angles.
Angle Pyramid guide marks 14°, 17°, 20° and 25° (maker).
Skip it if… you want a polished, mirror-like edge.
Sources: manufacturer page · maker support page · Checked Nov 18, 2026
Check price on AmazonFor single-bevel knives, the Chef'sChoice 15XV and 1520 manuals give their own procedure: sharpen the beveled side only, in the stage the manual names. Sharpal says the 156N handles single or double bevels. The Chef'sChoice 4643 pull-through isn't for single-bevel knives, and Kyocera's DS-38 says the same. The edge shapes are drawn on sharpening angles by brand.
Shun warns against using a diamond steel for regular honing and offers free lifetime sharpening (you pay shipping). Global's UK site says it doesn't recommend electric sharpeners because they take too much metal off the blade. Look up your exact knife in the angle finder. For stones, start with whetstones for beginners, or set an exact angle on a guided system. Rolling sharpeners with a 15° block are on rolling sharpeners.
Hold the knife maker’s angle yourself: 1000 restores a dull edge and 6000 polishes; no coarse chip side. Maker source.
325/1200 diamond plate used dry; maker lists single or double bevels. The angle is held by hand. Maker source.
Its 15–30° adjustment can reach a published 16° edge, but not a 10° santoku edge. Maker source.
Specs verified: November 2026 · Updated 2026-11-18 · How we choose