Whetstone grit selector

As an Amazon Associate I earn from qualifying purchases. Some links on this page are affiliate links — if you buy through them, we may earn a commission at no extra cost to you. Disclosure

Choose how the edge looks and which stones you have. You'll get the grits to use, in order, and anything your set can't do.

Your grit sequence

  1. medium: 1000 grit
  2. fine: 6000 grit

Coarse ≤400, fine ≥2000 are editable grouping assumptions, not equal grit scales across makers. No ceramic, serrated or scissors suitability is inferred. If you already own the chosen set, use it rather than buying it again.

Illustration: two-layer whetstone (1000 and 6000 grit) on a rubber tray, angle held by hand, dimensions not published by the maker

Shun Combination Whetstone 1000/6000

Check price on Amazon

Shopping for this selected set? Its published grits are 1000 / 6000. no coarse side for chips; angle is held by hand; stone must be soaked first Maker source.

Example result above updates as you change the settings below. Use existing suitable equipment when you already own it.

1. Edge condition
2. Your stones
Assumptions you can change

Where the bands come from

BandWhat makers say it's forSource
Coarse (≤ 400)Wüsthof 400 side "smooths off any unevenness"; Sharpal 325 "restores a dull or damaged edge"; Lansky: start coarse for a very dull edge or a new angleWüsthof, Sharpal, Lansky
MediumShun 1000 side for restoring dullness; Lansky: start on medium for touch-upsShun, Lansky
Fine (≥ 2000)Shun 6000 side to refreshing and polishing; Wüsthof finer side hones; Sharpal 1200 for honingShun, Wüsthof

The band limits (400 and 2000) are our grouping, and you can change them above. Makers' scales aren't identical, which is why the grit chart keeps each stone's own number. If the answer includes a chip over about 2 mm, check hone or sharpen first. Shun's service sharpens out chips of 2 mm or under. New to stones? Start with whetstones for beginners, or see what you trade away on whetstone vs electric.

FAQ

Is a 1000 grit whetstone enough?
Shun describes its 1000 side as the one for restoring a dulled edge and the 6000 side for refreshing and polishing. A 1000 stone sharpens; a finer stone refines. It won't repair chips, which need a coarser grit.
Why do grit numbers differ between brands?
Stone makers use different grading systems. Sharpal, for example, gives microns: 325 grit is 45 microns and 1200 grit is 12 microns. The tool keeps each maker's own number.

Specs verified: November 2026 · Updated 2026-11-18 · How we choose