Hone or sharpen?

As an Amazon Associate I earn from qualifying purchases. Some links on this page are affiliate links — if you buy through them, we may earn a commission at no extra cost to you. Disclosure

A dull-feeling edge may need honing, sharpening or the maker’s service. The default example is still dull after honing; change the four answers to describe your knife.

Sharpen the dull edge

Shun's advice: once honing stops bringing a dull edge back, the knife needs sharpening.

Maker source

If you do not already own a suitable tool, these match this task. Confirm the knife maker’s bevel and blade limits before buying; no steel-hardness suitability is inferred.

Illustration: two-layer whetstone (1000 and 6000 grit) on a rubber tray, angle held by hand, dimensions not published by the maker

Shun Combination Whetstone 1000/6000

Check price on Amazon

Japanese knives at their own angle; restoring a dull edge, then polishing. Limits: no coarse side for chips; angle is held by hand; stone must be soaked first Maker source.

Illustration: two-sided diamond plate (325 and 1200 grit) on a storage base, 14° / 17° / 20° / 25° per side, 6.5 × 3.27 × 1.26 in (L × D × H) from the maker, drawn to the maker's dimensions

SHARPAL 156N Dual-Grit Diamond Whetstone

Check price on Amazon

dry sharpening with no soaking; single- or double-bevel knives (maker); beginners who want an angle guide. Limits: finishes at 1200 grit; angle guide has four set angles Maker source.

Example result above updates as you change the settings below. Use existing suitable equipment when you already own it.

1. What kind of edge?
2. Any visible damage?
3. Have you honed it?
4. Paper test

The tree behind it

  1. Cutco Double-D edge? Send it to Cutco. Cutco says no home sharpener or sharpening service.
  2. Crack, broken tip or chip over about 2 mm? Maker's service or a professional.
  3. Ceramic? Only a diamond sharpener the knife maker approves. Kyocera's only covers Kyocera knives.
  4. Small chip? Coarse grit first, then finer. See the grit selector.
  5. Serrated? Only tools whose maker lists serrated edges. See serrated sharpeners.
  6. Honed and still dull? Sharpen. Honed and it helped? Keep honing.
  7. Not honed yet? Hone, then repeat the paper test.

Why the difference matters is drawn out on honing vs sharpening. If the answer is "sharpen," the sharpener finder matches one to your knife. Schedules from knife makers are in how often to sharpen.

FAQ

Does honing remove metal?
Shun says honing does not create a new edge and does not remove metal. Sharpening removes metal to make a new edge.
Can I fix a chipped knife at home?
Shun's service sharpens out chips of 2 mm or under by removing the metal in line with the chip. At home that means starting on a coarse grit. Larger damage is a job for the maker or a professional.

Specs verified: November 2026 · Updated 2026-11-18 · How we choose