Spyderco Tri-Angle Sharpmaker
15°/20° medium/fine rods are a maintenance option when the knife maker allows them; not a schedule requirement. Maker source.
As an Amazon Associate I earn from qualifying purchases. Some links on this page are affiliate links — if you buy through them, we may earn a commission at no extra cost to you. Disclosure
There's no universal schedule, but knife makers do give owners rough numbers. The pattern across them is the same. Hone often, sharpen rarely, and let the edge, not the calendar, decide.
See relevant tools and maker limits
Keep using existing suitable equipment; frequency alone does not justify replacing a working sharpener.
15°/20° medium/fine rods are a maintenance option when the knife maker allows them; not a schedule requirement. Maker source.
For a dull edge that needs sharpening: 1000 then 6000, rather than routine coarse metal removal. Maker source.
The 400 side addresses unevenness; avoid treating an already sharp edge as a repair job. Maker source.
| Maker | Honing | Sharpening | Source |
|---|---|---|---|
| Shun | "Some cooks hone once a week, while others hone every day"; weekly home cooking: about once a week | "about once a year is often enough" for many home cooks; more for heavy use | Shun |
| Victorinox | every few uses | once or twice a year | Victorinox |
| Global (UK) | weekly | two to three times a year | Global |
All three agree on the structure. Honing is the regular step, measured in days or uses. Sharpening is the occasional one, measured in months. Shun's summary: "hone for maintenance, sharpen for restoration."
The figures depend on the knife and on how it's used. Shun explains that its knives are thinner and harder than typical German knives (it hardens VG10 and VG-Max steel to 60–61 Rockwell and SG2 to 61–62), and that harder steel tends to hold an edge longer. Victorinox and Global make different steels and edges, and they suggest different intervals. How often you cook, what you cut and what you cut on matter as much as the brand. Shun notes that professional cooks or anyone using knives heavily "will likely need to sharpen more often."
A calendar is only a rough guide, so watch the knife instead. Common signs include tomato skins that the blade slides over instead of cutting, onions that crush instead of slicing, and paper that tears instead of parting. None of these mean sharpening yet. They mean check the edge. A rolled edge feels the same as a worn one in use, and honing fixes the first in a few strokes. Keep a simple habit: hone when the knife starts to feel less keen, and note how long the effect lasts. When honing stops making a difference, that's your sharpening interval. It will probably land near the makers' numbers above.
Don't expect every knife in the block to need sharpening at once. A chef's knife used daily wears faster than a slicer used on holidays, and a paring knife used on a plate wears faster than one used on a board. Serrated bread knives are a special case. Global says its serrated knives don't need sharpening at all, and Cutco says its Double-D edges go back to the factory. See serrated sharpeners for the ones whose makers allow it.
Simple ways to check an edge, like the paper test and the burr check, are in how to tell if a knife is sharp.
If honing doesn't help, the next question is how. A touch-up on a fine grit, or a full sharpening on a medium one? The grit selector answers that for stones. The finder picks a sharpener if you don't have one. Shun owners can also send knives in: Shun sharpens them free for as long as you own them; you pay shipping and processing.
Specs verified: November 2026 · Updated 2026-11-18 · How we choose