What angle to sharpen kitchen knives

As an Amazon Associate I earn from qualifying purchases. Some links on this page are affiliate links — if you buy through them, we may earn a commission at no extra cost to you. Disclosure

Preserve the knife maker’s bevel. A different sharpener angle changes the edge; the table distinguishes published per-side figures from ambiguous ones.

See relevant tools and maker limits

Match a published per-side angle, not a nationality

Illustration: manual sharpener, tall two-slot head and top handle, 14° per side, dimensions not published by the maker

WÜSTHOF Two-Stage Hand-Held Knife Sharpener

Check price on Amazon

A genuine fixed 14° choice for the maker’s corresponding Western blades, not a universal German angle. Maker source.

Illustration: two-sided diamond plate (325 and 1200 grit) on a storage base, 14° / 17° / 20° / 25° per side, 6.5 × 3.27 × 1.26 in (L × D × H) from the maker, drawn to the maker's dimensions

SHARPAL 156N Dual-Grit Diamond Whetstone

Check price on Amazon

Hold other supported bevels by hand; its 14°/17°/20°/25° guide is not an automatic angle clamp. Maker source.

Per side or included?

Most knife makers quote the angle per side: the angle between one bevel and the center line of the blade. The included angle is the full V, twice the per-side angle on a symmetrical edge. HORL explains it this way: "the cutting angle is usually twice the grinding angle." Spyderco marks its Sharpmaker the same way: 30° is 15° each side and 40° is 20° each side. Sharpener makers usually quote per side too, but check first.

15° versus 20° per sideTwo edge cross-sections. A 15° per side edge has a 30° included angle and is narrower; a 20° per side edge has a 40° included angle and is wider. 15° 15° per side 30° included typical of Japanese-style makers 20° 20° per side 40° included a common fixed setting on sharpeners Included angle = 2 × the angle per side on a symmetrical edge. Not to scale.

Factory angles by brand

Brand and seriesAngleBasisIn the maker's words
WÜSTHOF — Classic, Ikon and other Western-style blades14°per side“standard blades is 14˚ per side” WÜSTHOF
WÜSTHOF — Asian-style (santoku, nakiri)10°per side“Asian-style (Santokus, Nakiris) 10˚ per side” WÜSTHOF
ZWILLING — ZWILLING knives (Western)15°not stated by the maker“approximately 15° for ZWILLING knives” ZWILLING
ZWILLING — ZWILLING santoku9–12°not stated by the maker“Santoku knives and all MIYABI knives should be 9-12°” ZWILLING
MIYABI — All MIYABI series9.5–12°not stated by the maker“traditional, Japanese 9.5° to 12° edge angle” MIYABI
Shun — Shun double-bevel knives16°per side“sharpened to a 16° angle on each side” Shun
Global — Global knives10–15°not stated by the maker“factory sharpened at an angle of between 10-15 degrees” Global
Victorinox — Kitchen knives (sharpening steel)30–40°not stated by the maker“When using a sharpening steel, the angle should be between 30-40°” Victorinox
MAC — MAC knives15°per side“angle around 30 degrees (15 degrees per side)” MAC
Misen — Misen knives15°not stated by the maker“15-degree edge angle, symmetrical grind” Misen
Mercer Culinary — Genesis15°not stated by the maker“Blade Angle 15°” Mercer Culinary
Made In — 8-inch chef knife (asymmetric)14°asymmetric (front bevel)“14° front + 4° reverse (18° total)” Made In
Made In — Santoku12.5°per side“12.5-Degrees (Either Side)” Made In
Cutco — Double-D serrated edgenot published—Factory service only for Double-D; no home sharpening. Cutco
Cutco — Straight edgenot published—No edge angle published; maker permits stone or steel maintenance. Cutco

Victorinox's "30–40°" is for the sharpening steel. Victorinox doesn't say whether this is per side or total. Zwilling, Miyabi, Global, Misen and Mercer don't say either. We show those figures exactly as stated and never convert them, and the angle finder doesn't match sharpeners to them.

Reading the table

Published per-side examples: Wüsthof Western 14° (PEtec 14.5°), Asian-style 10°; Made In santoku 12.5°; MAC 15°; Shun 16°. Made In’s chef knife differs front/back: 14°/4°, 18° total. For an unstated basis, ask the maker before setting a sharpener.

Cutco publishes no angle for straight edges and says its Double-D serrated edges must go back to the factory.

Edge shapes

Edge types seen in cross-sectionFour edge cross-sections: symmetrical double bevel, convex, single bevel with a flat back, and asymmetric double bevel. Double bevelConvexSingle bevelAsymmetric same angle both sidescurved facetsflat back, e.g. yanagibae.g. 14° + 4° (Made In)

A symmetrical double bevel is what most Western and many Japanese kitchen knives have, and what fixed-angle sharpeners are built for. A single-bevel knife, like a yanagiba, is flat on the back. Chef'sChoice's 15XV and 1520 manuals give a separate single-bevel procedure, sharpening the beveled side only. Tumbler says to check the knife maker's instructions first, and not to assume its 15° or 20° settings suit every single-bevel knife.

Matching a sharpener

The angle finder compares exact and close settings; the editable 2° tolerance never unlocks a purchase. The same rule applies to rolling tools and HORL versus Tumbler.

Checking the angle you're actually sharpening

HORL suggests the marker method: run a felt-tip marker along the edge on both sides, then sharpen. When the ink is gone from both sides, you've reached the angle. More edge checks are in how to tell if a knife is sharp.

FAQ

Is 15 or 20 degrees better for kitchen knives?
Neither is better in general. Use the angle your knife maker publishes: Wüsthof says 14° per side and Shun 16° on each side. Zwilling says about 15° and Miyabi 9.5–12°, without saying per side or total.
What's the difference between per side and included angle?
Per side is the angle of one bevel. On a symmetrical edge the included angle is twice that, so 15° per side is a 30° edge.

Specs verified: November 2026 · Updated 2026-11-18 · How we choose