Spyderco Tri-Angle Sharpmaker
Maker lists the rounded ceramic-rod edges for serrations; retain the knife maker’s care procedure. Maker source.
As an Amazon Associate I earn from qualifying purchases. Some links on this page are affiliate links — if you buy through them, we may earn a commission at no extra cost to you. Disclosure
"Best" here means the closest match to your knives: the knife maker's angle, the knife type and what the sharpener maker allows. Every figure comes from the makers; we don't lab-test sharpeners. How we choose.
Serrations need a narrow or rounded abrasive that can reach into each scallop. Many sharpeners only allow serrated knives in one slot, and some forbid them. Everything on this page has a maker who says serrated is fine, and where.
Cutco Double-D goes to Cutco; Global says its serrated knives do not need sharpening. Those instructions override a generic tool listing.
Maker lists the rounded ceramic-rod edges for serrations; retain the knife maker’s care procedure. Maker source.
Its manual permits serrated blades in stage 3 only, not stages 1–2. Maker source.
| Model | Angles | Abrasive and grit | Stages | Serrated | Ceramic | Warranty |
|---|---|---|---|---|---|---|
| 15° and 20° per side | high-alumina ceramic stones (medium + fine) (medium / fine) | 2 | yes — rounded edges of the stones (maker) | not published | not published | |
| 15° per side | 100% diamond (stages 1–2), stropping/polishing disks (stage 3) | 3 | yes — stage 3 only (manual) | no | 3-year limited | |
| 15° and 20° per side | 100% diamond disks | 3 | yes — stage 3 only (manual) | no | 1-year limited | |
| 20° per side | convex carbides + fine ceramic wheel | 2 | yes — ceramic wheel only, not the carbide slot (maker page) | not published | 3 years |
| Maker says | Serrated knives |
|---|---|
| Spyderco Sharpmaker | Use the rounded edges of the stones with a slightly looser grip |
| Chef'sChoice 15XV | Stage 3 only |
| Chef'sChoice 4643 | Stage 3 only ("Polishing & Serrated") |
| Work Sharp Kitchen Edge | Ceramic wheel only, not the carbide slot |
| Work Sharp CPE2 | Honing wheel only, not the sharpening slot |
| Work Sharp Precision Adjust | With an add-on serration rod, not in the box |
| Tumbler, HORL | Not for serrated edges |
Mid-range · guided V-rods
Good fit for: serrated knives (rounded edges of the stones); 15° or 20° touch-ups without a clamp.
| Variant / maker reference | 204MF |
|---|---|
| Type | guided V-rods |
| Angles | 15° and 20° per side |
| Abrasive and grit | high-alumina ceramic stones (medium + fine) (medium / fine) |
| Stages | 2 |
| Serrated knives | yes — rounded edges of the stones (maker) |
| Ceramic knives | not published |
| Single-bevel knives | not published |
| Power | manual |
| Warranty | not published |
Limits: ceramic stones only, no coarse diamond; two fixed angles.
Base sets 30° inclusive (15° per side) or 40° inclusive (20° per side) (maker).
Skip it if… your knives are chipped or very dull.
Sources: manufacturer page · Checked Nov 18, 2026
Check price on AmazonPremium · electric
Good fit for: converting Western knives to a 15° edge; fast sharpening with no angle to hold; serrated knives in stage 3.
| Variant / maker reference | Model 15XV, Brushed Metal, SKU 0101508 |
|---|---|
| Type | electric |
| Angles | 15° per side |
| Abrasive and grit | 100% diamond (stages 1–2), stropping/polishing disks (stage 3) |
| Stages | 3 |
| Serrated knives | yes — stage 3 only (manual) |
| Ceramic knives | no |
| Single-bevel knives | yes — manual gives a procedure for traditional single-bevel Japanese knives (stage 2, beveled side only) |
| Power | corded, 120 V |
| Water or oil | none — manual says no lubricants |
| Warranty | 3-year limited |
Limits: one fixed angle (15°): it re-angles 20° knives; corded, counter space needed.
From the maker's instructions:
Converts 20° factory edges to a 15° Trizor XV edge (maker page).
Skip it if… you want to keep a 20° edge on German knives; you own ceramic knives.
Sources: manufacturer page · manual · Checked Nov 18, 2026
Check price on AmazonBudget · manual pull-through
Amazon's title says "2-Stage"; Chef'sChoice lists the ProntoPro 4643 with three stages. Check the listing details before you order.
Good fit for: 15° and 20° knives without power; serrated knives in stage 3.
| Variant / maker reference | Model 4643, SKU 4643009 |
|---|---|
| Type | manual pull-through |
| Angles | 15° and 20° per side |
| Abrasive and grit | 100% diamond disks |
| Stages | 3 |
| Serrated knives | yes — stage 3 only (manual) |
| Ceramic knives | no |
| Single-bevel knives | no — manual: designed for double-faceted edges; sashimi-style single-bevel knives are for the electric 15XV/1520 |
| Power | manual |
| Warranty | 1-year limited |
Limits: 15° knives must stay out of stage 2 (manual); not for single-bevel knives.
From the maker's instructions:
3 stages per Chef'sChoice (15°, 20°, and polishing & serrated); the Amazon listing title says 2-Stage.
Skip it if… you own ceramic or single-bevel knives.
Sources: manufacturer page · manual · Checked Nov 18, 2026
Check price on AmazonBudget · manual pull-through
Good fit for: a very dull everyday knife at 20°; honing serrated bread knives on the ceramic wheel.
| Variant / maker reference | WSKTNKES |
|---|---|
| Type | manual pull-through |
| Angles | 20° per side |
| Abrasive and grit | convex carbides + fine ceramic wheel |
| Stages | 2 |
| Serrated knives | yes — ceramic wheel only, not the carbide slot (maker page) |
| Ceramic knives | not published |
| Single-bevel knives | not published |
| Power | manual |
| Warranty | 3 years |
Limits: abrasives can't be replaced (maker rates 500–950 sharpenings); one fixed 20° angle.
Maker rates the abrasives at a minimum of 500 and up to 950 sharpenings; nothing on it can be replaced (maker page).
Skip it if… your knives have narrow Japanese edges.
Sources: manufacturer page · Checked Nov 18, 2026
Check price on AmazonCheck the knife maker first. Global says its serrated knives don't need sharpening. Cutco says not to sharpen its Double-D edges at home or anywhere else: send them to the factory. Shun's service hones serrated blades but can't sharpen them. The hone-or-sharpen tool walks through those cases. For the mistakes makers warn about, read do knife sharpeners ruin knives?. The Sharpmaker is also on guided systems, and the electric options are on electric sharpeners.
Cutco Double-D goes to Cutco; Global says its serrated knives do not need sharpening. Those instructions override a generic tool listing.
Maker lists the rounded ceramic-rod edges for serrations; retain the knife maker’s care procedure. Maker source.
Its manual permits serrated blades in stage 3 only, not stages 1–2. Maker source.
Specs verified: November 2026 · Updated 2026-11-18 · How we choose