Knife sharpening angle finder

As an Amazon Associate I earn from qualifying purchases. Some links on this page are affiliate links — if you buy through them, we may earn a commission at no extra cost to you. Disclosure

Choose your knife. You'll get the factory figure as published by the knife maker, with a link, and a table showing which sharpeners in our list match it, come close, or would change it.

WÜSTHOF — Classic, Ikon and other Western-style blades

Knife maker source.

PEtec factory edge: 14.5° per side Knife maker note.

Wüsthof suggests sharpening its knives with a Wüsthof sharpener. Knife maker note.

14° per side

Matching purchase options use the exact stated angle, not the editable “close” tolerance. Stones require hand-held control; owning a suitable tool already means no new purchase is necessary.

Illustration: manual sharpener, tall two-slot head and top handle, 14° per side, dimensions not published by the maker

WÜSTHOF Two-Stage Hand-Held Knife Sharpener

Check price on Amazon

Use 14° per side; one fixed 14° angle; serrated and ceramic use not stated by the maker Maker source.

Illustration: two-layer whetstone (1000 and 6000 grit) on a rubber tray, angle held by hand, dimensions not published by the maker

Shun Combination Whetstone 1000/6000

Check price on Amazon

Hold the knife maker’s bevel by hand; no coarse side for chips; angle is held by hand; stone must be soaked first Maker source.

Illustration: two-layer whetstone (400 and 2000 grit) in a holding tray, angle held by hand, dimensions not published by the maker

WÜSTHOF Whetstone J 400/2000

Check price on Amazon

Hold the knife maker’s bevel by hand; finishes at 2000, no polishing side; stone must be soaked first; angle is held by hand Maker source.

All angle comparisons, including non-matches
SharpenerSettingAngle-only comparison
WÜSTHOF Two-Stage Hand-Held Knife Sharpener14°fits 14°
Shun Combination Whetstone 1000/6000any (held by hand)hand 14°
WÜSTHOF Whetstone J 400/2000any (held by hand)hand 14°
SHARPAL 156N Dual-Grit Diamond Whetstone14°, 17°, 20°, 25°hand 14°
Chef'sChoice Trizor XV 1515°close 15°
Chef'sChoice AngleSelect 152015°, 20°close 15°
Chef'sChoice ProntoPro 464315°, 20°close 15°
Work Sharp Precision Adjust Knife Sharpener15–30°close 15°
Spyderco Tri-Angle Sharpmaker15°, 20°close 15°
HORL HORL 2 Rolling Knife Sharpener15°, 20°close 15°
Tumbler Original Rolling Knife Sharpener15°, 20°close 15°
Work Sharp RKS Rolling Knife Sharpener15°, 17°, 20°, 25°close 15°
Work Sharp E2 Kitchen Electric Knife Sharpener20°no 20°
Work Sharp Kitchen Edge Knife Sharpener20°no 20°
Lansky Deluxe 5-Stone Sharpening System17°, 20°, 25°, 30°no 17°

The table is an angle comparison, not approval for serrated, ceramic, scissors or every steel type. Close means within 2° and would change the bevel, so it is not listed as a match.

Example result above updates as you change the settings below. Use existing suitable equipment when you already own it.

Your knife
Assumption you can change

Sharpeners at one scale

Only three makers publish a size for their sharpener, so only those three are drawn here at one scale, with an inch grid. On each card, every model has its own drawing — slots, handle, base, tray, grit layers, clamp, rods or roller discs, from the maker's page — and each angle is drawn as a wedge at the true angle, so you can see how much steeper 20° is than 15°.

Knife sharpeners at one scaleSharpeners whose maker publishes a size, drawn to the same scale, shortest to longest: Kyocera DS-38 6.1 × 3.86 × 2.87 in; SHARPAL 156N 6.5 × 3.27 × 1.26 in; Chef'sChoice 4643 9.25 × 2 × 2.06 in. Not shown, because the maker publishes no size: Chef'sChoice Trizor XV 15, Chef'sChoice 1520, Work Sharp Kitchen Electric, Work Sharp Kitchen Edge, WÜSTHOF Two-Stage, Shun 1000/6000, WÜSTHOF 400/2000, Work Sharp Precision Adjust, Lansky Deluxe 5-Stone, Spyderco Sharpmaker, HORL 2, Tumbler Original, Work Sharp Rolling.1 ft1 in2 in3 in4 inKyoceraDS-386.1 × 2.87 in, angle not published325 / 1200 gritSHARPAL156N6.5 × 1.26 in, 14° / 17° / 20° / 25°123Chef'sChoice46439.25 × 2.06 in, 15° / 20°
Illustration to scale — not product photos. Not shown, because the maker publishes no size: Chef'sChoice Trizor XV 15, Chef'sChoice 1520, Work Sharp Kitchen Electric, Work Sharp Kitchen Edge, WÜSTHOF Two-Stage, Shun 1000/6000, WÜSTHOF 400/2000, Work Sharp Precision Adjust, Lansky Deluxe 5-Stone, Spyderco Sharpmaker, HORL 2, Tumbler Original, Work Sharp Rolling — their cards are marked "not to scale". See how we draw these.

How it works

The two-angle picture is on sharpening angles by brand, and it's the first thing to check on the Chef'sChoice 15XV vs 1520 page. If nothing fixed fits your knife, a guided system or a whetstone lets you set the angle yourself.

FAQ

Is the angle per side or total?
Most makers quote the angle per side; the included angle is twice that on a symmetrical edge. Where a maker doesn't say, the tool shows the figure as stated and does not guess its basis.
What if my sharpener's angle is different from my knife's?
A fixed-angle sharpener grinds the edge to its own angle. Over a few sharpenings the knife's edge changes to match the sharpener.

Specs verified: November 2026 · Updated 2026-11-18 · How we choose